Latest Products

  • 20kw Electric PTC Heater
  • 2.5kw High Voltage Coolant Heater
  • 5KW High Voltage Coolant PTC Heater
  • Electric Bus Defroster
  • 12v Diesel Water Heater
  • 2kw Air Parking Heater

Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

BTMS For Electric Bus video

BTMS For Electric Bus

Our Electric Bus BTMS (Battery Thermal Management System) is an integrated liquid cooling & heating solution purpose-built for transit electric buses and coaches. It actively stabilizes lithium battery packs within the optimal working temperature window under extreme hot/cold climates, preventing overheating, low-temperature power drop, cell inconsistency and thermal runaway. Seamlessly communicating with BMS via CAN bus, the unit automatically switches between cooling, PTC heating and self-circulation modes to protect battery safety, extend cycle life and secure stable driving range for fleet operators.

Description

If you're looking for the btms for electric bus, welcome to wholesale the product from our factory. As one of the leading manufacturers and suppliers in China, we will offer you the best service and fast delivery. Now, check the quotation with our seller.

 

BTMS for electric bus

 

Our Electric Bus BTMS (Battery Thermal Management System) is an integrated liquid cooling & heating solution purpose-built for transit electric buses and coaches. It actively stabilizes lithium battery packs within the optimal working temperature window under extreme hot/cold climates, preventing overheating, low-temperature power drop, cell inconsistency and thermal runaway. Seamlessly communicating with BMS via CAN bus, the unit automatically switches between cooling, PTC heating and self-circulation modes to protect battery safety, extend cycle life and secure stable driving range for fleet operators.

 

Products Description

 

Lithium batteries on electric buses suffer severe heat accumulation during fast charging and continuous operation. In frigid regions, low temperature cuts charging speed and driving mileage sharply. Nanfeng BTMS solves these pain points with closed-loop glycol liquid circulation. The system collects real-time temperature signals from BMS, adjusts cooling/heating output dynamically and balances temperature across battery modules.


Designed for 8m, 10m, 12m electric city buses and tourist coaches, it supports roof-mounted or chassis-mounted layout, and is fully customizable for OEM & retrofitting projects.

 

product-1009-192

 

Our BTMS is a system used to cool/heat up the battery pack of new energy vehicles.

 

During the driving or charging process of the vehicle, the temperature of the battery pack rises due to the external ambient temperature or the charging and discharging characteristics of the battery pack itself, resulting in the loss of the best working environment of the battery. The service object of this product is the water-cooled battery pack, through the control of water temperature, the battery pack in the battery pack works within a certain temperature range, so as to ensure the quality of the battery, prolong its service life, and ensure the cruising range of the vehicle.

 

Compared with the traditional heat dissipation method, this product has the characteristics of fast heat dissipation, high efficiency, stable temperature control, which can significantly improve battery performance and extend service life.

product-1500-1500
product-1500-1500
product-1500-1500
product-1500-1500

Core Working Modes

Active Cooling Mode

When battery temperature exceeds upper limit, the compressor refrigeration circuit kicks in. Coolant absorbs heat from battery cold plates and dissipates heat through the chiller/radiator, suppressing temperature rise during high-rate charging and long-route operation.

 

PTC Heating Mode

For cold winter start-up and low-temperature charging, the built-in PTC liquid heater warms the coolant to preheat battery packs, ensuring batteries reach the allowable charging/discharging temperature quickly and avoiding capacity attenuation.

 

Self-Circulation Mode

Compressor and heater stop; the coolant pump runs for internal circulation to homogenize temperature between modules, reducing cell-to-cell delta T and slowing uneven aging.

 

 

product-692-433

This unit has three modes, incluading cooling mode, heating mode, and self-circulation mode. The unit switches between these three modes based on the parameters feedback from the battery pack BMS.

Key Advantages

Precise Temperature Uniformity

Optimized flow channel design.Eliminates local hot spots and extends battery service life significantly.

Wide Ambient Adaptability

Reliable operation from -20℃ up to +55℃ ambient, suitable for tropical, temperate and high-cold zone bus fleets.

Stable CAN 2.0 Communication

Standard CAN protocol, perfect handshake with mainstream BMS.

High Protection & Vibration Resistance

Key electrical components (compressor, pump, controller, connectors) reach IP67 rating. Reinforced aluminum housing, passed heavy-duty vibration & shock test for rough road conditions.

Low Energy Consumption & High Efficiency

Brushless pump and high quality fan design, variable capacity control; reduces auxiliary power consumption to reserve more range for buses.

Flexible Integration & Easy Maintenance

Compact modular structure, compatible with roof / chassis installation. Serviceable components are accessible for routine inspection and replacement. 

working principle

product-750-717

Products certificates

product-750-745

 

Products application  

product-800-449

 

company profile

 

product-750-993

 

Why Cooperate with Us?

 

1.International Certification & Quality Assurance:

Our products have passed CE, IAFT16949,ISO45001,and other international certifications, complying with the import standards of European, American, Southeast Asian, and other global markets, ensuring product quality and safety.

2.Professional R&D & Customization Capability:

We have a professional R&D team with 30+ years of experience in low-temperature defrosting technology, which can provide personalized solutions according to your special working conditions and needs.

3.Global After-Sales Service Network:

We have overseas service centers and authorized agents in major global markets, providing 24/7 technical consultation, on-site installation guidance, and spare parts supply services to solve your after-sales worries.

4.Competitive Price & Timely Delivery:

Relying on large-scale production lines and optimized supply chains, we provide factory-direct prices to enhance your market competitiveness. The minimum delivery cycle is 7-15 days, ensuring that your orders are delivered on time.

 

FAQ

FAQ

 

 

product-470-408

01.Can this BTMS work with my existing BMS?

Yes, it adopts standard CAN2.0 protocol. We can adjust communication logic according to your BMS protocol file.

02.Can you change cooling / heating capacity?

Yes, we support customized cooling capacity, PTC power, voltage and mounting bracket.

03.What refrigerant options do you offer?

R134a/R410a is standard; R1234yf is available for EU market to meet new refrigerant regulation.

04.Is it roof mount only?

We supply both roof-mounted and chassis-mounted versions for electric buses.

 

Send us your battery pack parameters, bus information. Our thermal engineering team will propose a matched BTMS solution and formal quotation for your project.

Hot Tags: btms for electric bus, China, factory, suppliers, manufacturers, seller, wholesale, quotation

Send Inquiry

(0/10)

clearall