Home > Products > Electric Vehicle Parts > High Voltage Coolant Heater > 1-10KW High Voltage Coolant Heater

Products

1.2KW PTC Electric Heater

Name: 1.2KW PTC Electric Heater Suppliers and Manufacturers China - Factory Quotation - NANFENG
Brand: Nanfeng
SKU: 219625786

Hebei Nanfeng Group has been producing heaters for more than 30 years, and our company is the largest manufacturer of automobile heating and cooling equipment in China and the designated supplier of military vehicles in China.Key markets targeted include electric vehicles. battery thermal management and HVAC refrigeration units. At the same time, we also cooperate with Bosch, and our product quality and production line have been highly recoanized by Bosch.

Send Inquiry

Description

If you're looking for the 1.2kw ptc electric heater, welcome to wholesale the product from our factory. As one of the leading manufacturers and suppliers in China, we will offer you the best service and fast delivery. Now, check the quotation with our seller.

1.2KW PTC Electric Heater

Products Description

12kw ptc coolant heater

ev ptc

PTC heater, also called PTC heating element, is composed of PTC ceramic heating element and aluminum tube. This type of PTC heater has the advantages of small thermal resistance and high heat exchange efficiency. It is an automatic constant temperature and power-saving electric heater. The outstanding feature lies in the performance. That is, when the fan fails and stops, the power of the PTC heater will automatically drop sharply because it cannot dissipate sufficient heat. At this time, the surface temperature of the heater is maintained at around the Curie temperature (usually 250°C). up and down), so as to avoid the phenomenon of "redness" on the surface of electric heating tube heaters, which will not cause burns, fires and other hidden dangers.

Products parameter

Model	WPTC09-1	WPTC09-2
Rated voltage (V)	355	48
Voltage range (V)	260-420	36-96
Rated power (W)	3000±10%@12/min,Tin=-20℃	1200±10%@10L/min,Tin=0℃
Controller low voltage (V)	9-16	18-32
Control signal	CAN	CAN

PTC Coolanr Heater Structure:

PTC heater structure

Products Details

automotive ptc heater

high voltage coolant heater

ev coolant heaetr

Product installation precautions

ptc heater installation

(1) Before powering on, make sure the installation is firm and the connectors are reliably connected (the main high voltage cannot be connected in reverse, otherwise the control will fail and the control board will be damaged for ≥1 minute)
(2) Connect the ground wire reliably to prevent static electricity from damaging components
(3) Antifreeze must not contain impurities to prevent clogging of the water tank.
(4) After unpacking, please be sure to check whether there is any appearance damage caused by transportation. Damage caused by improper installation and use (including use and installation conditions beyond the scope of the specification) are not covered by the warranty.
(5) Product installation direction: The heater can be installed in any other direction except that the water inlet and outlet cannot be downward at the same time.