Latest Products
Contact Us
Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd
Phone: +86 18811334770
Tel: +86 0317 8620396
Tel: +86 010 58673556
Candy Jiao
E-mail: nh.jiao@auto-parkingheater.com
Email: nh.li@auto-parkingheater.com
Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China
High Voltage PTC Heater For Electric Vehicle
WPTC-13 High Voltage Electric Vehicle PTC heaters are capable of providing heat to the cockpit for safe defrosting and defogging, or to other mechanisms that require temperature regulation. Nanfeng Group has a keen sense of smell for the development of new energy vehicles, and launched WPTC-13 series of coolant heater of high voltage to escort your electric vehicles.
Description
High Voltage PTC heater for Electric Vehicle
Product Description
WPTC-13 8KW
Function Description:
-
Under low temperature conditions, increase the temperature of the battery, motor, electronic control, etc. to improve performance.
-
Provide warm air and heat source to the air-conditioning system in winter.
Design Advantages:
-
Using 4-way PWM control mode, the busbar inrush current is small, and the requirements for relays in the vehicle circuit are low.
-
PWM mode control enables the power to be continuously adjusted.
-
The CAN communication mode can report the working status of the controller, which is convenient for vehicle control and monitoring.
Product Parameters
| Item | WPTC-13 |
| Rated voltage(VAC) | 430VAC (323-552VAC/50Hz&60Hz, three-phase four-wire power supply), inrush current I≤30A; |
| Ambient temperature: | -40~105℃ |
| Ambient humidity: | 5%~90%RH |
| Medium: | 50% water/50% ethylene glycol |
| Heater protection grade: | IP67 |
| Heater weight: | 3.7±0.1Kg |
| Heater air tightness: | apply pressure 0.6MPa, test for 3min, the leakage is less than 500Pa |
| 1 | Upper shell |
| 2 | PCB board |
| 3 | Water tank |
| 4 | PTC heating core assembly |
| 5 | Lower shell |
| 6 | High voltage connector |
| 7 | Low voltage connector |
Installation Advice
In order to ensure the maximum energy efficiency of plumbing PTC, the following matters should be noted when installation:
-
The highest point of PTC should be lower than the expansion tank.
-
The pump should not be higher than PTC.
-
PTC shall be installed after the pump and before the warm air core.
-
Pay attention to the direction of PTC inlet and outlet.
-
Before the first operation of the PTC or after the maintenance of the pipe parts, confirm the exhaust, and then power the PTC.
Advantage
Power:
Almost 100%heat output.
heat output independent of coolant medium temperature and operating voltage.
Safety:
Three-dimensional safety concept.
Compliance with international vehicle standards.
Efficiency:
Rapid performance.
Direct,fast heat transfer.
Certification
Application
Shipping
FAQ
Q: What's your tem of the delivery?
A: Our ordinary delivery term is FOB Beijing. We also accept EXW, CFR, CIF, DDP, DDU etc. We'll offer you the shipping charges and you can choose the one which is the most convenient and effective for you.
Q: What is your term of payment?
A: 100% T/T payment before shipping.
Q: Can we use our own logo?
A: Yes, we can print your private logo according to your request.
Q.How your quality guarantee?
A.We have 100% quality guarantee to customers. We will be responsible for any quality problem. The redundant sealing design can improve system reliability.
Hot Tags: high voltage ptc heater for electric vehicle, China, factory, suppliers, manufacturers, seller, wholesale, quotation, 8kw engine coolant heater ev, 10kw automotive ptc coolant heater, PTC battery coolant heater for new energy vehicle, electronic PTC heater, 20kw battery PTC coolant heater for ev, ev high voltage heater
You Might Also Like
