Latest Products
Contact Us
Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd
Phone: +86 18811334770
Tel: +86 0317 8620396
Tel: +86 010 58673556
Candy Jiao
E-mail: nh.jiao@auto-parkingheater.com
Email: nh.li@auto-parkingheater.com
Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China
Water And Electric Defroster For Ev
Its advantages: High voltage defroster is for electrical bus, and it can defrost the windshield Safer product with the application of PTC heating
Description
Water and electric defroster for ev
Products Description
PTC electric heating components are equipped with a two-stage thermostat (90-degree normally closed thermostat connected in series with a 150-degree manual reset thermostat)
Wind control mode: high-speed fan, high-speed line, and low-speed line colleagues connected to DC24V; low-speed fan, low-speed line connected to DC24V
Lead length outside the shell: 500mm±50mm
The outer loop filter is welded in the middle of the bottom surface
The electrical connector adopts a waterproof connector, and the wiring harness end of the connector is equipped with a dust-proof sheath
Electrical wires should have flame-retardant properties and good insulation properties, and use flame-retardant wires with a temperature resistance of not less than 125°C.
| OE NO. | ZD2721 |
| Rated voltage of the electric heating device | DC600V |
| Motor Power | 180W |
| Voltage Range | DC520V-DC680V |
| Motor rated voltage | DC24V |
| Nominal heat release | 4kw±10% (under the conditions of electric heating device voltage DC600V and inlet air temperature 20℃) |
| Ambient temperature | -40℃~+50℃ |
| Rated power of the fan | 180w±10% |
| Fan rated current | ≤8A |
Products installation
1. The defroster should be installed as close to the instrument panel as possible. The cross-sectional area of the air outlet duct should not be smaller than the defroster outlet area. Avoid excessive bends, as this will increase airflow resistance and affect defrosting effectiveness.
2. When installing the radiator or defroster, all joints must be tightly sealed. Foreign objects must be prevented from entering the piping, and there must be no dead bends.
3. Drill holes according to the dimensions shown in the drawing or the actual product. Ensure that the air inlet and outlet are unobstructed and that there are no obstructions.
Products application
Products detail pictures
why is it a better choice?
The integrated hydroelectric defroster is more than a simple addition of functions; it's a systematic innovation focused on energy conservation and user experience. It precisely addresses the biggest pain point of electric vehicles in cold climates-reduced range. Through ingenious engineering, it transforms previously wasted engine heat into a valuable source of warmth.
For buyers, this means:
Longer winter range and reduced charging anxiety.
Fast cabin heating for improved comfort and safety.
Lower overall cost of ownership. While the initial purchase price is slightly higher, the savings in electricity bills are significant.
Products certification
NF GROUP INTRODUCTION
large enterprise scale
Efficient and precise processing and testing equipment.
Standardized Production
Passed IATF16949 certification and obtained relevant patent certificates.
High-Quality Customized Services
No intermediate links, providing one-stop service from design, processing, mold trial to mass production.
Hot Tags: water and electric defroster for ev, China, factory, suppliers, manufacturers, seller, wholesale, quotation
You Might Also Like
