Latest Products

  • 20kw Electric PTC Heater
  • 10kw PTC Coolant Heater
  • 2.5kw High Voltage Coolant Heater
  • 7kw High Voltage Coolant Heater
  • 5KW High Voltage Coolant PTC Heater
  • Electric Bus Defroster

Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

6kw High Voltage PTC Heater video

6kw High Voltage PTC Heater

The high voltage coolant heater is mainly used for heating the passenger compartment ,defrosting and removing fog on the window,or preheating battery thermal management system battery ,to meet the corresponding regulations, functional requirements.

Description

 

6kw High Voltage PTC Heater

High Voltage Water Heater

1,Product Introduction

The PTC water heater can provide heat for the cockpit of the new energy vehicle and meet the standard of safe defrosting and defogging. It also provides heat to other parts of the vehicle that require temperature regulation, such as the battery.

2,Product Parameter

 

Item WPTC01-1 WPTC01-2
Heating output 6kw@10L/min,T_in 40ºC 6kw@10L/min,T_in 40ºC
Rated voltage(VDC) 350v 600v
Working voltage(VDC) 250-450 450-750
Controller low voltage 9-16 or 18-32V 9-16 or 18-32V
Control signal CAN
Heater dimension 232.3 * 98.3 * 97mm 232.3 * 98.3 * 97mm
Installation dimension 144*128*119 144*128*119
Joint dimension φ25, φ20mm φ25, φ20mm
Heater weight <2.4kg <2.4kg

 

3,Product control scheme

battey coolant heater

 

①Complete the command input from the air conditioner panel.

②The air conditioner panel sends the user's operation command to the controller through CAN communication or ON/OFF PWM.

③After receiving the command signal, the plumbing PTC controller will turn on the PTC in PWM mode according to the power requirements.

 

Design advantages:

①Using 4-way PWM control mode, the busbar inrush current is small, and the requirements for relays in the vehicle circuit are low.

② PWM mode control enables continuous adjustment of power.

③CAN communication mode can report the working status of the controller, which is convenient for vehicle control and monitoring.

 

4,Precautions for product installation

Installation of PTC coolant heater

(1)Before power-on, pay attention to the installation is firm, and the connectors are connected reliably (the main high voltage cannot be reversed, otherwise the control will fail, and the control board will be damaged if it exceeds 1 minute)

(2)The grounding wire is connected reliably to prevent static electricity from damaging components

(3)Antifreeze should not contain impurities to prevent clogging of the water tank

(4)After unpacking, be sure to check whether there is any appearance damage caused by transportation. Damage caused by improper installation and use (including use and installation conditions beyond the scope specified in the specification) is not covered by the warranty.

5,Product Application

high voltage PTC parking heater application

Hot Tags: 6kw High Voltage PTC Heater, China, factory, suppliers, manufacturers, seller, wholesale, quotation, HVAC coolant heater for ev car, High Voltage Coolant Heaters for electric vehicle, PTC heaters for car, ptc heater for electric vehicles, high voltage heaters battery, 5kw battery coolant heater

Send Inquiry

(0/10)

clearall