Electric High Voltage Heater

 

Electric High Voltage Heater

Product Description

The electric High Voltage Heater (HVH) converts DC electric power into heat with practically no losses.

It is the ideal heating system for plug-in hybrids (PHEV) and battery electric vehicles (BEV).

 

Powerful similar to its namesake, this high-voltage heater is specialized for electric vehicles. By converting electrical energy of battery with DC voltage, ranging from 300 to 750v, into abundant heat, this device provides efficient, zero-emission warming-all throughout the interior of the vehicle. 

 

Our high-voltage coolant heaters can be used for improving battery energy performance in EVs and HEVs. In addition it allows comfortable cabin temperatures to be generated in a short time enabling a better driving and passenger experience. With high thermal power density and fast response time due to their low thermal mass, these heaters also extend pure electric driving range as they use less power from the battery. 

 

Product Parameter

Items	10KW	15KW	20KW
Rated voltage(V)	600V	600V	600V
Supply voltage (V)	450-750V	450-750V	450-750V
Current consumptio(A)	≈17A	≈25A	≈33A
Flow (L/h)	＞1800	＞1800	＞1800
Weight (kg)	8kg	9kg	10kg
Installation size	179x273	179x273	179x273
Control signal	Rocker switch hardwire control	Rocker switch hardwire control	Rocker switch hardwire control

1.Rated working voltage: DC600V

2. Voltage range: DC450V~DC750V 

3. Rated power:10/15/20KW 

4. Working temperature:-40ºC~85ºC 

5. Unmarked dimensional tolerance shall comply with GB/T1804-C 

6. Service medium: coolant, ratio of water to ethylene glycol=50:50 

7.Heater high voltage plug-in : PL082X-60-6 High voltage plug-in at high voltage harness end: PL182x-60-6(provided by bus factory)

 

Advantage

 

Low maintenance cost	Environmental protection	Energy saving and comfort
Product maintenance free	100% emission free	Intelligent tempereture control
High heating efficiency	Quiet and noiseless	Closed-loop control
Low cost of use	No waste	Stepless speed regulation
No need to replace consumables	Strong heat	Heating quickly

 

Installation Position

The installation position should be determined according to the specific vehicle model. 

The water pump shall be integrated with the heater and installed at the water inlet of the heater. The installation position of the heater should be lower than that of the water pump, which can not only make the water circulation more smooth, but also ensure the fluidity of the loop as much as possible when the water pump stops due to fault. 

The heater shall be installed in the ventilated space of the vehicle as far as possible, and the temperature shall not be lower than + 85 ℃ if installed in the engine compartment

 

Application

 

 

The heater is mainly used to heat the passenger compartment, defrost and demist the windows, or preheat the power battery thermal management battery, and meet the corresponding regulations and functional requirements.

 

Shipping

 

Hot Tags: electric high voltage heater, China, factory, suppliers, manufacturers, seller, wholesale, quotation, ptc coolant heater for ev car, 2 5kw automotive PTC coolant heater, ev ptc heater, high voltage PTC battery heater, PTC heaters battery heater, EVs high voltage PTC heater