Latest Products

  • 20kw Electric PTC Heater
  • 2.5kw High Voltage Coolant Heater
  • 5KW High Voltage Coolant PTC Heater
  • Electric Bus Defroster
  • 12v Diesel Water Heater
  • 2kw Air Parking Heater

Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

Electric Three-way Valve video

Electric Three-way Valve

NF recently launched a new product -Electric Three-way Valve

Description

 

Electric Three-way Valve

 

 

Products Description

An electric three-way valve is a key actuator driven by a motor or solenoid coil, featuring one inlet and two outlets (or two inlets and one outlet), used for precise control of the flow direction and flow rate of fluids (coolant or refrigerant). It acts like a "smart switchman" in a thermal management system, guiding fluids to different branches according to instructions to achieve intelligent heat distribution. 

3 way valve 4

 

Water valve internal leakage ≤20mL/min (water test), 30kPa pressure difference
Water valve external leakage ≤5mL/min (gas test), 340kPa (gauge pressure)
Mode switching response time <10s
Control method LIN
Standard operating voltage 24V
Operating voltage range 20V~30V
Lifespan 300,000 switch cycles

Electronic water valves use a DC motor and gearbox to control valve rotation, achieving reversing or flow regulation functions.

 

The valve position is controlled by a DC motor, gearbox, and position sensor. The position sensor outputs a corresponding voltage based on the valve angle.

 

 

Scope of application

3 way valve 6

 

Electronic water valves can be designed in diameters ranging from 16Øs to Ø25, requiring only changes to the pipe dimensions.

The Ø25 water valve allows for flow rate control from 5 L/MIN to 100 L/MIN.

Products installation

 

The installation location diagram is shown below (allowed installation angles)

installation

Connection requirements with the vehicle: 

inatallation2

★It is recommended to install rubber shock-absorbing pads at the bottom of the two M6 connection mounting holes, with a hardness of HA70~80.

core function

3 way valve 2

The core function of an electric three-way valve is to divert and merge fluids.

Diverting mode: Distributes fluid from one inlet to two outlets according to a set ratio.

Merging mode: Mixes fluids from two inlets and allows them to flow out from a single outlet.

Products advantage

 

3 way valve 3

Precise Control: Enables stepless linear flow regulation with high control precision and fast response (milliseconds to seconds).

 

Energy Efficiency: Distributes heat on demand, avoiding energy waste and is key to improving overall vehicle thermal efficiency.

 

Enhanced Comfort: Achieves rapid and stable cabin temperature regulation, reducing temperature fluctuations.

 

High Reliability: Requires stable operation under long-term high temperature, high pressure, alternating hot and cold temperatures, and coolant corrosion; excellent sealing is crucial.

 

Low Power Consumption and Quiet Operation: The drive motor must have low power consumption and low operating noise.

 

Company introduction

 

 

BTMS07

 

 

 

 

BTMS10

 

Products certification

 

BTMS10

 

Hot Tags: electric three-way valve, China, factory, suppliers, manufacturers, seller, wholesale, quotation

Send Inquiry

(0/10)

clearall