New Energy Vehicle Thermal Management Technology
The thermal management system (TMS) of a car is an important part of the vehicle system. The development purposes of the thermal management system are mainly safety, comfort, energy saving, economy and durability.
Automotive thermal management is to coordinate the matching, optimization and control of vehicle engines, air conditioners, batteries, motors and other related components and subsystems from the perspective of the entire vehicle to effectively solve thermal-related problems in the entire vehicle and keep each functional module in the optimal temperature range. Improve the economy and power of the vehicle and ensure safe driving of the vehicle.
The thermal management system of new energy vehicles is derived from the thermal management system of traditional fuel vehicles. It has common parts of traditional fuel vehicle thermal management systems such as engine cooling systems, air conditioning systems, etc., as well as new parts such as battery motor electronic control. cooling system. Among them, replacing the engine and gearbox with three electric engines is the main change in the thermal management system of traditional fuel vehicles. In addition, there may be an electric compressor instead of an ordinary compressor, and a battery cooling plate, battery cooler, and PTC are added. Components such as heaters or heat pumps.
General Components of Thermal Management
The thermal management system of a car is roughly composed of an electronic water pump, an electromagnetic valve, a compressor, a PTC heater, an electronic fan, an expansion kettle, an evaporator, and a condenser.
Electronic water pump: It is a mechanical device that transports liquid or pressurizes liquid. It transfers the mechanical energy of the prime mover or other external energy to the liquid, increasing the energy of the liquid to transport the liquid. The operating principle is to judge based on the current status of the power or other components, and control the flow rate by controlling the flow rate of the water pump. According to different flow rates, heat can be taken away to maintain temperature stability.

Solenoid valve: an electronically controlled valve, including two-way and three-way valves. The refrigerant flowing out from the condenser outlet is in a high-temperature and high-pressure liquid state. In order to reduce the saturation temperature of the liquid refrigerant, its pressure needs to be reduced. At the same time, in order to keep the flow rate within a suitable range, before the refrigerant enters the evaporator, it needs to be Throttle it by controlling the opening and closing of the valve.
Compressor: By pushing and compressing the low-pressure and low-temperature refrigerant gas, it does work on the gaseous refrigerant, causing it to produce changes in pressure and temperature, thereby turning it into a high-temperature and high-pressure gaseous refrigerant.
Condenser: Cools the high-temperature refrigerant. After the refrigerant is discharged from the compressor, it is in a high-temperature and high-pressure state. At this time, it needs to be cooled down and the process of changing the refrigerant from gas to liquid is completed.
Evaporator: The working principle of the evaporator is exactly the opposite of that of the condenser. It absorbs heat in the air and transfers the heat to refrigeration, allowing it to complete the gasification process. After the refrigerant is throttled by the throttling device, it is in a state of coexistence of vapor and liquid, also called wet steam. After the wet steam enters the evaporator, it begins to absorb heat and evaporates into saturated steam. After that, if the refrigerant continues to absorb heat, it will become superheated steam.
Electronic fan: the only component that can actively supply air to improve the heat exchange performance of the radiator. Currently, most of the cooling fans used in vehicles are axial flow cooling fans, which have the advantages of high efficiency, small size and easy placement. They are usually placed behind the radiator.
PTC heater: It is a resistance heating device, usually with a rated operating voltage between 350v-550v. When the PTC electric heater is powered on, the initial resistance is low, and the heating power is large at this time. After the temperature of the PTC heater rises above the Curie temperature, the resistance of the PTC increases sharply to generate heat, which is transferred to the water through the water medium in the water pump. The components transport heat.

Heating system: In the heating system, if it is a hybrid vehicle or a fuel cell system vehicle, the heat produced by the engine or the fuel cell system itself can be used to meet the heat demand. The fuel cell system may require PTC heating at low temperatures. A heater is used to assist heating so that the system can heat up quickly; if it is a pure power battery vehicle, a PTC heater may be needed to meet the heat demand.
Refrigeration system: If it is a heat dissipation system, it is necessary to use a water pump to drive the heat dissipation liquid in the components to flow, take away local heat, and use a cooling fan to assist in rapid heat dissipation.
Air conditioning refrigeration system: In principle, it uses the special properties of the refrigerant (common refrigerants include R134-tetrafluoroethane, R12 difluorodichloromethane, etc.) to absorb and absorb heat associated with its evaporation and condensation. Release to achieve the effect of heat transfer. The seemingly simple heat transfer process actually involves a complex phase change process of the refrigerant. In order to change the state of the refrigerant and allow it to transfer heat over and over again. The air conditioning system is mainly composed of four major parts: compressor, condenser, evaporator, and expansion valve. The structural diagram of the air conditioning refrigeration cycle system is shown in the figure below. The refrigerant comes out of the compressor, passes through the condenser, expansion valve, evaporator, and then returns to the compressor to complete a refrigeration cycle.






