Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

Thermal management integrated circuit

May 13, 2024

Thermal management integrated circuit

 

Thermal management of electric vehicles usually consists of five circuits. The first is the PE cooling circuit, which can cool the power converter and motor. A radiator is usually used to cool the cooling water and waste to the PE. The heat generated by PE can be used as heating, so a heat exchanger and valves are configured in the loop.

 

The second is a circuit that cools and heats the battery. When the battery temperature is high, the durability will be reduced, so it is necessary to cool the battery to maintain the appropriate temperature. When the outside temperature is significantly different from the outside temperature, use air conditioning refrigerant. When the difference between the outside temperature and the battery temperature is large, that is, when the outside temperature is higher, there is a mode of using a second-hand refrigerator and cooling it through the radiator. In addition, the battery thermal management circuit has a heating function to ensure fast charging performance and prevent output degradation in winter, so a battery heating mode that enables the cooling water heater to operate is required.

 

The third is the heating loop, which in some cases uses a PIC heater for air heating to heat the room, and where the cooling water uses a heater to heat and heat the battery at the same time, sometimes using a HeatPump's room radiator.

 

The fourth is the refrigerant circuit. In conventional internal combustion engine vehicles, the refrigerant circuit is the air conditioning circuit used for indoor cooling, but in electric vehicles, in addition to indoor cooling, the cooling method used for battery cooling is self-cooling. . Heat pump circuits drive computer cooling, mainly for heating. The refrigerant circuit needs to be heated through waste heat recovery and appropriate distribution of cooling performance, and its functions are becoming increasingly complex.

 

Finally, it is computational cooling, which is an essential part when configuring an autonomous vehicle, with specific details on cooling and heating capabilities currently under review. The biggest problem with thermal management circuits is that each of these circuits is not configured independently; each circuit is organically connected and becomes more complex as functionality is added.

 

For cooling, there are cooling using external temperature and cooling using refrigerant. In the cooling method using external temperature, the PE, battery, computer and refrigerant circuit all constitute a radiator, and a circuit sharing one circuit is used. Radiators are a common method of using refrigerant, and a method of using a cooler to lower the temperature of the refrigerant is applied to methods of using refrigerant that is shared by the battery, autonomous driving computing, and indoor cooling circuits. For heating and cooling, use a heat pump circuit connected to each circuit to absorb waste heat, each typically operating in 7 to 14 modes.

Send Inquiry