Contact Us
Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd
Phone: +86 18811334770
Tel: +86 0317 8620396
Tel: +86 010 58673556
Candy Jiao
E-mail: nh.jiao@auto-parkingheater.com
Email: nh.li@auto-parkingheater.com
Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China
Oil Cooled Lubricated Vane Air Compressor
Oil Cooled Lubricated Vane Air Compressor is mainly composed of four parts:air end,motor,cooler and base.The air end and cooler are mounted directly on the flange face of the motor with a bell jar and flange,which are integrally assembled and mounted on a base.
Description
If you're looking for the Oil Cooled Lubricated Vane Air Compressor, welcome to wholesale the product from our factory. As one of the leading manufacturers and suppliers in China, we will offer you the best service and fast delivery. Now, check the quotation with our seller.
Oil Cooled Lubricated Vane Air Compressor
Products Description

Oil Cooled Lubricated Vane Air Compressor is mainly composed of four parts:air end,motor,cooler and base.The air end and cooler are mounted directly on the flange face of the motor with a bell jar and flange,which are integrally assembled and mounted on a base.
|
Name Model |
Air displacement
(m3 /min)
|
Exhaust
pressure(Mpa)
|
Motor
Power(kW)
|
Oil Content
(mg/m³)
|
Maximum
Temperature
(°C)
|
Vent size
|
Weight
(kg)
|
|
NFAZH4.0/AZR4.0
|
0.38 | 1.2 | 4.0 | ≤2 | 110 |
M22×1.5(inner)
|
50 |
|
NFAZH3.0/AZR3.0
|
0.28 | 1.2 | 3.0 | ≤2 | 110 | M22×1.5(inner) | 50 |
|
NFAZH2.2/AZR2.2
|
0.20 | 1.2 | 2.2 | ≤2 | 110 | M22×1.5(inner) | 50 |
Working principle
Air intake: After the air is filtered through the air filter assembly, the air inlet valve assembly enters the air compressor.
The compression: The rotor rotates eccentrically in the stator,and its surface has vertical grooves.The sliding piece is placed in the groove and pressed to the inner wall of the stator by centrifugal force.In this way,the stator,the rotor and the sliding piece made the compression chambers,and compression air will be compressed in the chamber.As the rotor rotates,the volume of the compression chamber formed by two adjacent vanes and stator decreased,thus completing the compression process.
Lubrication: Lubrication and cooling during compression is accomplished by an efficient oil filling system which ensures good process control at lower lubricating oil consumption levels.The oil film formed on the inner wall of the rotor avoids the contact of metal parts,thus eliminating the wear phenomenon.
Exhaust: The compressed oil and gas mixture is finally discharged through the minimum pressure valve.
Lubrications:Sealing,cooling and lubrication are ensured by oil circulation inside the compressor.This process is accomplished by the pressure difference between the compression chamber and the oil chamber.Oil pump is not
required.
Oil and Air Separation:The compressed oil and air mixture is discharged from the rotor-stator unit through the labyrinth path,and most of the oil is separated in the labyrinth structure due to constantly changing direction.The mixed gas is sprayed toward the oil cap through the small hole of the gas pipe and subjected to a collision separation.The remaining oil enters the oil filter element,the air is separated by the effect of condensation.
Minimum Pressure Valve:The minimum pressure valve is installed at the outlet of the air compressor.Its function is to maintain a minimum working pressure of 0.6-0.75Mpa in the machine to ensure good lubrication and cooling cycle and better oil and gas separation.The minimum pressure valve cooperates with the internal unloading system to effectively prevent compressed air from flowing back and realize the automatic unloading of the exhaust when the machine is stopped,so that the compressor can be started without load.
Oil Cooler:The heat which generated during air compression process is transferred to the oil;it can be cooled by the airflow blowed by fan through the oil cooler (Oil-water cooler).
Intake Valve:The air intake valve of the air compressor is a one-way valve.When the compressor is running,negative pressure is generated inside the machine,and the air inlet valve is opened automatically.When the machine stops running,the internal high-pressure gas will quickly closed the intake valve,and the internal oil and air mixture will not spurt out.
Main Components of the Intake and Control System:The intake system of this air compressor uses a high-quality air filter with high filtering precision.Its function is to filter dust and other impurities in entering compressor.Users should preform periodically maintenance or replacement according to the operating conditions.As on the outer surface of the air filter can be gently blown off from the inside to outside with low pressure air.If the filter is severely blocked or damaged,it should be replaced in time.
After the compressed oil and gas mixture is coarsely separated by multiple mechanical collisions,the separated oil particles are entered into the working chamber of the air compressor through the oil return filter and the oil return hole under the action of self-weight and pressure.The user should periodically change the oil core according to the regulations or working conditions.
Products features
Thermal insulation design
| Product | Products on the market |
Optimized design
|
|
|
|
|
|
Optimized points |
Additionally, the Thermal insulation shell is designed to reduce heat loss and noise, and balance the temperature of oil separation with airend shell.
The integrated design of the whole COMPRESSOR makes the appearance in clean and tidy. The idea of the modular and simple design is to make it easier for requests of pre-installation, maintenance, and repair!
|
|
Integrated Oil separation design
| Product | Products on the market |
Optimized design
|
|
|
|
|
|
Optimized points |
A. The lubrication system, oil return system, vent system and oil distribution system of the whole machine have been improved to make the whole machine more compact, reduce the risk of leakage and increase the use of built-in pipelines. Minimize the risk of pipeline leakage. B. Fluorine rubber O-ring seals are adopted for sealing between of the built-in lubricating oil and compressed air, which enhances the high temperature resistance of the seals. C. It changes the external oil return pipe into the built-in oil return pipe in Oil return system, which reduces the cost of the spare parts and maintenance. |
|

Optimized cyclone oil separation system
| Product | Products on the market |
Optimized design
|
![]() |
![]() |
|
|
Optimized points |
New design inside of structure of cyclone oil separation | |
Optimized Oil separator for installation and sealing
| Product | Products on the market |
Optimized design
|
![]() |
![]() |
|
|
Optimized points |
Change the way of oil separator from spring pressing to thread fastening,prevent the risk of oil separator falls off,then to reduce the risk of leakage,spare part with costs | |
Optimized Spare parts
| Product | Products on the market |
Optimized design
|
![]() |
![]() |
|
|
Optimized points |
Added oil drain valve to oil shell to facilitate oil discharge during after-sales maintenance,and reserve oil filter position to increase additional oil filter | |
Products installation
1. Electrical
Installation of electrical equipment must be carried out by a qualified electrician. Ensure correct input of motor parameters; failure to do so may result in motor damage.
2. Earthing
The air compressor must be properly earthed to ensure safe operation.
3. Piping
Air lines must be connected by a qualified professional. Pipe dimensions should be matched to the air compressor's discharge volume and discharge pressure. The discharge pipe should be positioned as low as possible below the outlet to facilitate condensate drainage, prevent water freezing, and allow for easy replacement. It is recommended to connect a flexible hose to the outlet to prevent damage to rigid pipe connections caused by compressor vibration.
For vehicles sold in the Northeast region, it is advisable to insulate the discharge pipe with thermal insulation material or to install a heating insulation device.
Products advantages
It employs advanced technology to produce air compressors of high reliability, cost-effectiveness and quality, backed by robust technical capabilities.
This compressor has advantages:
1. Compact structure and light weight.
2. Stable and reliable operation with low noise levels and ease of installation.
3. This new generation air compressor is safe, environmentally friendly, and energy-efficient.
Products pictures




Products application

Products certificates

To guarantee product quality, operational compliance and international market adaptability, our enterprise has completed certification of multiple authoritative management systems and product‑level qualifications. Our certification scope includes quality management, environmental management, occupational health & safety, as well as relevant product safety certificates required for global market access.
These official credentials demonstrate that our R&D, production, inspection and after‑sales processes are fully standardized in line with international norms. Supported by complete certification qualifications, we are capable of supplying qualified and compliant products for customers across different regions worldwide.
Products profiles

Founded in 1993, NF group is a professional high-tech enterprise dedicated to the R&D, production and sales of Electric Bus Battery Coolant Heater ,New Energy Vehicle Circulation Coolant Pump,air compressors for new energy vehicles and industrial supporting fields. Rooted in the pneumatic system core component industry, we focus on providing high-reliability, energy-saving solutions for new energy commercial vehicles, passenger buses, heavy-duty trucks, intelligent autonomous vehicles and industrial precision equipment.
contact us
Our address
Room 505, Building B, Free Town Center, No. 58, East Third Ring South Road, Chaoyang District, Beijing,100022,P.R.China
Phone Number
Tel: +86 010 58673556
E-mail: nh.jiao@auto-parkingheater.com
E-mail: nh.li@auto-parkingheater.com

Hot Tags: Oil Cooled Lubricated Vane Air Compressor, China, factory, suppliers, manufacturers, seller, wholesale, quotation
You Might Also Like



























