Contact Us
Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd
Phone: +86 18811334770
Tel: +86 0317 8620396
Tel: +86 010 58673556
Candy Jiao
E-mail: nh.jiao@auto-parkingheater.com
Email: nh.li@auto-parkingheater.com
Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China
Electric Bus Water Heating Heater
A 10kW PTC coolant heater engineered for EV thermal management — validated through a comprehensive DV testing program and CE certified for reliable performance in demanding automotive environments.
Description
If you're looking for the electric bus water heating heater, welcome to wholesale the product from our factory. As one of the leading manufacturers and suppliers in China, we will offer you the best service and fast delivery. Now, check the quotation with our seller.
Electric bus water heating heater
Products Description

The fundamental difference between PTC and heating wire: Heating wire has a near-constant resistance and requires an external temperature controller and thermal fuse for safety redundancy; control failure can lead to thermal runaway. PTC integrates the heating element, temperature sensor, and current limiter into a single ceramic chip, producing no open flame, not getting red-hot, and boasting a lifespan of tens of thousands of hours. The trade-offs are higher cost, steady-state power limited by heat dissipation conditions, a 3-7 times higher inrush current in cold conditions, and the current limit (Tc) not being adjustable after factory setting.
Product Parameters

| Item |
SR10-12 |
| Power |
24KW (600VDC,20L/min,20℃) |
| High voltage |
400~750VDC |
| Low voltage | 16-32VDC |
| Communication method | CAN |
| IP grade | IP 6K9K & IP67 |
| Coolant | 50 ( water) +50 (ethylene glycol) |
|
Heating method |
PTC positive temperature coefficient thermistor |
Products installation

The PTC water heater base has four mounting points, secured to the vehicle using four 6.5mm diameter screws.
Material Characteristics
All materials used in the PTC heater assembly are ELV (Enhanced Leakage and Restricted Substances) tested. Before entering mass production, all PTC raw materials require suppliers to provide prohibited substances reports and material reports.
Unique Product Advantages

1. High-power, rapid heating, suitable for extremely cold conditions in Europe and Northern Europe (reliable start-up at -40℃)
2. High electrothermal conversion efficiency, precise stepless temperature control, reducing overall vehicle energy consumption
3. Vehicle-level safety design, complete isolation of water and electricity, multiple protection mechanisms.
4. IP67 / IP6K9K high-protection die-cast aluminum housing, resistant to salt spray and washout.
5. Standardized CAN2.0B communication, plug and play, simple integration with thermal management systems.
6. Long lifespan, low attenuation, low total life-cycle maintenance costs.
Products Relevant products
Application

New Energy Commercial Vehicles (24 kW as the Main Battlefield)
Electric Buses/Buses: Large cabin volume and large glass area require 15–35 kW heat sources; 24 kW simultaneously handles passenger area heating and windshield defrosting/defogging.
Battery Pack Low-Temperature Preheating: Lithium-ion batteries cannot be charged with high current below 0℃. The BMS will first request the PTC to heat the cells to a suitable range before releasing fast-charging power, maintaining temperature uniformity during driving. This is the main reason why 24 kW is chosen for battery-swapping heavy trucks, mining trucks, and construction machinery-to rapidly heat multiple battery packs simultaneously in extremely cold conditions.
Other Onboard Heating Users: Preheating of electric drive/fuel cell circuits, urea, or pipeline antifreeze; some solutions use the PTC as an energy dissipation load (RBS) when regenerative braking is limited.
Differences between Air-Powered PTCs: Directly heats the air, with a response time in seconds, but with low power and mostly used in passenger vehicles; 24 kW is basically water-based heating, relying on coolant to distribute heat.
FAQ
Q1. What is the working voltage of this 24kW PTC coolant heater? Can it match an 800 V high-voltage platform?
A: Standard options 350V / 600V / 800V DC are available; we can match your vehicle's HV platform. We can provide I-V curves and derating data under different voltages.
Q2. What is the protection class? Can it be washed with high-pressure water?
A: Standard IP67, optional IP6K9K. Die-cast aluminum housing, resistant to high-pressure jet cleaning and salt spray for winter European road conditions.
Q3. What communication protocol do you use? Can we integrate it with our BMS / VCU?
A: Standard CAN 2.0B, 250/500 kbps, supports UDS diagnosis. We provide a DBC file, function specification, and can customize CAN signals.
Q4. What coolant is compatible? Can we use G12 / G13 ethylene glycol coolant?
A: Compatible with a standard 50:50 water-ethylene glycol mixture, including G12 / G13 European standard coolants.
Q5: What safety protection functions are built in? Is there galvanic isolation?
A: PTC self-limiting temperature, thermal fuse, over-voltage /under-voltage/over-current /dry-run protection. High voltage and coolant circuit fully galvanically isolated, dielectric test ≥3500VAC.
Hot Tags: electric bus water heating heater, China, factory, suppliers, manufacturers, seller, wholesale, quotation
You Might Also Like






















