Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

Analysis of Several Heating Solutions for Electric Vehiclesة

Nov 14, 2023

Analysis of Several Heating Solutions for Electric Vehicles

 Fuel heating method

 Working principle of fuel heater

After starting the fuel heater, the fuel pump begins to take fuel from the fuel tank and delivers the fuel to the heater. The fuel is atomized through the atomization device into a flammable oil-air mixture and ignited by the spark plug. The coolant in the water circulation system is heated when flowing through the heater, and then flows into the heater core, thereby providing sufficient heat source for the cab, providing a comfortable environment for the occupants, and meeting the requirements of defrosting and defogging regulations.

Implementation plan

Add a fuel heater, fuel tank, oil pump, oil pipe, air intake muffler, air intake pipe, exhaust muffler, exhaust pipe, water pump, and water pipe to form a closed water circulation between the fuel heater, water pump, and water pipe and the original car heater core. system.

Advantages

1) Significantly improve the driving range of pure electric vehicles. At an ambient temperature of -10°C and driving for 1 hour in urban road conditions, using fuel heating greatly improves the driving range of pure electric vehicles compared to using electric heating.

2) It can extend the service life of the battery. Using fuel heating to heat the cab does not consume battery energy. Therefore, under the same driving mileage, the depth of battery discharge is lower when using fuel heating than using electric heating. According to the characteristics of lithium batteries, battery life depends on the depth of discharge. The lower the depth of discharge, the more times the battery can be charged and discharged, thereby extending the service life of the battery.


Disadvantages

1) The fuel heating system consumes fuel and produces tail gas emissions, which is contrary to the zero-emission concept of pure electric vehicles.

2) The fuel heating system has a complex structure, a large number of parts, and a high additional cost, which reduces the practicality of electric vehicles.

3) In order to meet the requirements of collision regulations for pure electric vehicles, the fuel heating system needs to break through the following topics: ① The layout position and protective measures of the fuel tank (when formulating the layout plan for pure electric vehicles, priority will be given to the layout of the battery pack, which is important for The layout of the fuel tank brings greater challenges. The fuel tank is arranged in the front cabin and does not meet the requirements of the forward collision regulations, and fuel filling is inconvenient; the fuel tank is arranged under the luggage compartment, which is difficult to meet the requirements of the rear collision regulations); ② The direction of the fuel pipeline should ensure that the fuel pipeline is away from the high-voltage wiring harness; ③ Protect the fuel pipeline and take measures to cut off the fuel due to collision to prevent fuel leakage due to collision.

Electric heating methods

Concept and functional principles of PTC

Most electric heating methods use PTC heating. PTC is the abbreviation of PositiveTemperature Coefficient, which means positive temperature coefficient, and generally refers to semiconductor materials or components with large positive temperature coefficient. Usually the PTC we refer to refers to the positive temperature coefficient thermistor, or PTC thermistor for short. PTC thermistor is a typical temperature-sensitive semiconductor resistor. When it exceeds a certain temperature (Curie temperature), its resistance value increases sharply as the temperature increases. That is, the power of the PTC heater will suddenly be reduced to a minimum value, causing the temperature to return below its Curie temperature. Because of this characteristic, PTC heaters have the advantages of constant temperature heating, no open flame, and long service life.

Low voltage air heating

Implementation plan
Since the heater core uses the waste heat of the coolant, it can save the power output of the low-voltage air heater and share part of the motor cooling function, reducing the power output of the radiator water tank.

Disadvantages

1) The amount of modification to the inherited parts is relatively large, and the modification cost is high.

2) Using a low-voltage air heater requires a certain amount of rectification space in the lower part of the original vehicle air-conditioning heater. However, adding a PTC auxiliary heating device will cause changes to the casing of the heater blower assembly. If you want to add a PTC auxiliary device under the heating core, the air duct and foot blowing duct in the lower part of the casing should be moved downward.

3) The control circuit needs to be changed again, and control components and some pipelines need to be added so that the controller can control the water pump and three-way valve. The control is complicated and the cost increases a lot.

4) The PTC is arranged in the cockpit, which poses certain safety risks. ,

 

Send Inquiry