Fuel Stove and Air Integrated Parking Heater-2
Operation instructions
Start fuel stove
Operate with a special control switch. If you need cooking function, press the cooking button and the red light will be on In a few seconds, the burner is on, ready to ignite and burn steadily. After adjusting the control knob non-polar adjustment power.
If air conditioning is needed, press the air conditioning button. A few seconds after the yellow light is on, the fuel oven will start to work. It will be ignited and burn stably.
After that, adjust the control knob to set the required room temperature, and the fuel oven will automatically follow the ratio of the actual room temperature to the set temperature. Automatic regulation of combustion power. It takes more than 5min for the fuel stove to start and burn steadily. If you need to convert to air conditioning mode when cooking mode, you must press the air conditioning button and button the upper cover
for conversion.Don't just buckle the top cover.
Switch from combustion to ventilation
When the fuel stove is in the burning state, press the ventilation button, the fuel stove will stop fuel, and turn to the ventilation mode after cooling down for a period of time. In the ventilation mode, adjust the control knob to adjust the wind speed. If ventilation function is needed, press the ventilation button, the fuel pump does not work, only the blower works.The function of circulating air to the room or sending waste heat to the fuel stove.
Turn off fuel stoves
When the fuel stove is working normally, which state is it working, press which key to turn off the fuel stove.For example, if you are working in cooking mode, press the "cook" button and the fuel stove stops heating fuel. After the burner is turned off, the combustion fan and heating fan will continue to operate for several minutes to reduce the temperature of the furnace and body.
