Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

Interpretation of the weak magnetic function of the motor

Jul 25, 2024

Interpretation of the weak magnetic function of the motor

Brief Analysis of Automotive Battery Management System (BMS)

 

The weak magnetic function of the motor means that during the motor starting process, the motor control system will first apply a small current to the motor so that the motor rotor will generate a certain degree of magnetic field, but it is not enough to make the motor run normally. This stage is called the weak magnetic state of the motor.

 

The main function of the weak magnetic function is to help the motor overcome static friction and dynamic friction during the starting process, making the motor start more smoothly, reducing the impact and stress during the motor starting, and reducing the risk of damage to mechanical and electrical equipment.

 

The weak magnetic function is usually implemented in the starting control system of the motor. Through the controller or inverter and other devices, a small current is first applied to the motor during the starting process to achieve the purpose of generating a weak magnetic field. Once the motor starts smoothly, the system will gradually increase the current so that the motor gradually reaches the rated operating state.

 

The weak magnetic function can also be used for fault detection and protection in some cases. For example, during the operation of the motor, if the magnetic field or magnetic resistance of the motor is detected to be abnormal, the system can diagnose and troubleshoot the fault by applying weak magnetic field to protect the safe operation of the motor and equipment. In some special cases, the weak magnetic function of the motor can also be used for specific application requirements, such as:

 

1. Reduce the starting current impact: In some cases where the grid current impact needs to be limited, by applying weak magnetic field, the current impact of the motor when starting can be reduced, the impact on the grid and equipment can be reduced, and the stability of the electrical system can be protected.

 

2. Reduce the starting torque: For some applications that need to minimize the torque impact during the starting process, such as the scenario where the mechanical impact generated during the starting is small, the weak magnetic function can be used to gradually increase the torque, start smoothly, and protect the mechanical transmission system.

 

3. Reduce the starting power demand: The weak magnetic function can help reduce the power demand when the motor starts, especially for high-power motors or limited power supply conditions, which can reduce the impact on the grid and electrical equipment and improve the energy efficiency of the system.

 

4. Prevent overload protection from being triggered: In some cases, the motor may be restricted by the overload protection during starting. By applying weak magnetic field, the load of the motor during starting can be reduced, the triggering of overload protection can be avoided, and the safe operation of the motor and the system can be protected.

 

In general, the weak magnetic function of the motor plays an important role in smooth starting, protecting equipment, and saving energy during the motor starting process. By properly applying the weakening magnetic field function, the stability, reliability and safety of the motor system can be improved to meet the needs of different application scenarios.

Send Inquiry