Research on Battery Cooling System for New Energy Vehicles
Heat pipe cooling battery technology
The heat generated by the battery pack is absorbed into the heat pipe through the copper sheet with strong thermal conductivity, and the fabric and core inside the pipe can effectively absorb and convert the heat energy. The operating efficiency of this battery cooling technology will be affected by the internal Performance effects of endothermic substances. In the heat pipe cooling topology system of new energy vehicle battery packs, it can be found that the battery heat energy absorbed by heat exchange materials such as copper sheets will pass through the political and legal mechanisms and condensation mechanisms to achieve energy circulation and refrigeration. By adsorbing the heat energy to the hollow part of the heat pipe, To realize the heat absorption of the liquid medium, when the liquid in the hollow part absorbs heat and vaporizes, a certain reverse air pressure phenomenon will be generated. Under the influence of the overall pressure drop, it will be introduced into the condensation mechanism of the heat pipe. These high-temperature liquids After condensation, it will liquefy again, and flow back to the hollow evaporation device along the circulation adsorption device inside the heat pipe, effectively realizing the repeated cycle of vaporization to liquefaction inside the heat pipe, effectively ensuring the battery life during the long-term operation of new energy vehicles. Continuous cooling requirements.
During the actual operation of the basic structure of a heat pipe-cooled battery, the battery cooling performance and efficiency formed by the liquid cooling medium must be taken into consideration, which is of great significance for evaluating the practical value of heat pipe technology. Looking at the single-tube heat pipe cooling model of lithium batteries, since the vaporization and liquefaction processes of the cooling liquid during single-tube operation are relatively simple, the cooling flow rate that can be provided is small, and it is not susceptible to interference from other environmental factors. The cooling efficiency of the battery pack is more outstanding [7]. When the cooling mechanism in the heat pipe system absorbs heat, it will not have a major impact on the inherent temperature state of the battery pack itself. It will only cool down the excess heat energy of the battery absorbed by the political and legal institutions, which is important for ensuring the operation of the battery pack. Temperature, fine control and performance optimization are of great significance.
In addition, during the study of the structural parameters of the heat pipe cooling system during operation, technicians found that there is a positive correlation between the length of the heat pipe and the cooling operation efficiency of the battery pack. However, due to the volume limitations of the automobile battery pack itself, the heat pipe The design of the structure cannot be extended indefinitely, but it can form a certain reference for optimizing the performance of the cooling system. During the vaporization process of the cooling medium liquid in the hollow inner cavity of the heat pipe, the stronger the reaction degree, the better the cooling performance of the battery pack. This reminds technicians that the cooling medium should be reasonably selected during the design of the cooling structure of the battery pack to ensure It can effectively extend the service life of the new energy vehicle battery pack and make its operation safer and more reliable during the charging and discharging process, as shown in Figure 1.
Phase change material cooling battery technology
Phase change material cooling battery technology, as the name suggests, uses phase change media to achieve heat exchange during the battery cooling process. This battery cooling technology is an emerging process method in recent years, which can use phase change materials to achieve heat exchange. Characteristics conducts detailed analysis and strict control of the current operating temperature and changing trends of automobile battery packs to ensure that the battery can consume excess heat energy through heat exchange of phase change media under different operating temperature conditions, effectively ensuring the safety of new energy vehicles. The battery pack can be in optimal operating condition for a long time. The phase change medium material has strong plasticity, which can not only fully absorb the excess heat energy of the battery pack, but also provide latent heat when the application is required, and does not involve other pollution in the entire energy interaction and conversion process. It is an ideal and environmentally friendly battery cooling medium material [8] because of issues such as material emissions. The phase change dielectric material can better ensure the stability of the temperature of the battery pack system during the process of absorbing and releasing heat. It can even control the heat absorption and release in advance through the analysis of temperature change trends, so that the automobile battery pack can It can achieve stable operation at approximately constant temperature and has stronger application advantages than other battery cooling technologies.
Common phase change materials include solid-liquid phase change, solid-solid phase change and composite phase change, which are mainly distinguished based on their state-to-state transition characteristics in endothermic and exothermic states. First, solid-liquid phase change materials are mainly composed of aliphatic hydrocarbons, alcohols and other substances. Although phase separation is still not easy to occur during the process of absorbing and releasing heat, it is prone to leakage problems after it transforms into a liquid state. The sealing requirements of the outer wrapping material are relatively high, and the actual application scenarios are relatively limited. Second, solid-to-solid phase change materials mainly achieve phase change through stem-shaped transformation, in which the molecules are arranged more compactly, which effectively reduces its surrounding volume during the cooling process of the battery pack, and the whole body presents a solid crystalline state. , there is no risk of material leakage, and the actual service life is longer. It is an ideal type of phase change material. Third, a composite phase change material is a solid-state material formed by adding a medium with phase change characteristics to a carrier substance. The phase change material that can cool the battery pack is called a working medium. The current phase change cooling of automobile battery packs also has strong development potential and practical value.






