Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

Safety issues with electric heaters

Dec 28, 2022

Safety issues with electric heaters

 

5kw high voltage PTC Heater

Sleep mode
A "hard wire wake-up" signal line is defined in the low-voltage connector. It is enabled when the input is the power supply voltage and prohibited when the input is the power supply ground.


When the PTC electric heater does not detect the hard wire wake-up signal, the PTC electric heater enters the sleep mode. In the sleep mode, the electronic devices of the controller are turned off and the low-voltage power supply current drops below 100uA. Once the hard wire signal is detected, the PTC electric heater will be awakened immediately.

 

Safety
PTC electric heater has the function of self safety protection. During normal operation, it can monitor its own operation status in real time and feed back to the vehicle controller through CAN interface. Once abnormal operation is found, it can be protected in time, such as automatically limiting heating temperature and working current.


The whole vehicle is responsible for monitoring the insulation condition of PTC electric heater.

 

Technical safety concept
The PTC electric heater system consists of 2 modules: electronic module and heating module.


The expected function of the PTC electric heater is to provide high-voltage power for the PTC heating element through IGBT, and control the heating current through software and temperature sensor Temp2.


Functional safety mechanisms for heating modules:
The over temperature of the heating module can be detected through software and temperature sensor Temp2, and the IGBT is controlled by software to turn off the heating current. In addition, the PTC heating element can limit the heating current and temperature independently of the electronic module. The sealed metal casing of the PTC electric heater can prevent the PTC electric heater from overheating.


Functional safety mechanisms for electronic modules:
The over temperature of the electronic module is detected by software and temperature sensor Temp1, and then the heating current is turned off by software. In addition, the sealed metal housing of the electronic module protects the PTC electric heater from overheating.

 

Send Inquiry