Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

Thermal management mode: Battery immersion cooling

Mar 15, 2023

Thermal Management Mode: Battery Immersion Cooling

 


Description of the cooling system

Air-cooled systems are the most widely used because they are simple in design, inexpensive and have no leakage problems. There are two types of air cooling: active, which uses forced convection, and passive, which uses natural convection. The low heat capacity (Cp = 1.006 kJ/kgK at standard temperature) and low thermal conductivity of air compared to media such as liquids make it unlikely that air cooling will be the technology of choice for the next generation of electric vehicles with larger battery packs and faster charging rates.

Liquid cooling can be divided into indirect and direct methods. Compared to air, coolant has a greater heat capacity and higher thermal conductivity. Indirect liquid cooling is currently one of the most common solutions for battery thermal management due to balanced temperature control. The most commonly used coolant is a mixture of water and ethylene glycol. The principle of indirect cooling is to allow the coolant to flow through channels on the bottom or side of the cell/cell module to transfer heat away from the system.

 

The properties of the coolant play an important role in thermal management and should meet several requirements, such as.
-Good electrical insulation
-High specific heat capacity and high thermal conductivity
-Non-flammable and/or high flash point
-Easy to produce and available in large quantities
-A suitable working temperature range
-Long shelf life for liquids

 

Send Inquiry