Latest Products

  • 20kw Electric PTC Heater
  • 2.5kw High Voltage Coolant Heater
  • 5KW High Voltage Coolant PTC Heater
  • Electric Bus Defroster
  • 12v Diesel Water Heater
  • 2kw Air Parking Heater

Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

EV Battery Thermal Management Unit BTMS video

EV Battery Thermal Management Unit BTMS

The Battery Thermal Management System (BTMS) is a crucial technology that regulates the temperature of batteries in electric vehicles and energy storage systems. It ensures optimal performance, extends battery lifespan, and safeguards against thermal runaway by using cooling or heating methods to maintain the battery within its ideal temperature range.

Description

If you're looking for the ev battery thermal management unit btms, welcome to wholesale the product from our factory. As one of the leading manufacturers and suppliers in China, we will offer you the best service and fast delivery. Now, check the quotation with our seller.

 

EV Battery Thermal Management Unit BTMS

 

Product Introduction

 

Battery Thermal and Cooling Management System

BTMS (Battery Thermal Management System) is a complete integrated battery temperature control solution, different from separate PTC heaters or single compressors. It realizes four core functions: high-temperature battery cooling, low-temperature preheating, temperature equalization, and fault monitoring. Using coolant as a heat transfer medium, the controller automatically switches cooling, heating, and self-circulation modes. It keeps cells within the optimal working range, reduces temperature differences inside the battery pack, and prevents thermal runaway. Compatible with LFP and NCM lithium batteries, it supports fast charging and all-weather operation of heavy-duty vehicles.

 

Operational Principle

 

The complete BTMS consists of multiple coordinated components: variable-frequency electric compressor, water-cooled condenser, 3-way coolant valve, high-voltage PTC liquid heater, brushless electronic water pump, expansion tank, pressure & temperature sensors, main ECU, heat exchanger, and pipe assembly. Modular layout supports independent battery thermal control or waste heat coupling with motor and E-axle loop.

 

product-542-345

 

Cooling mode:

 

The fan and compressor turn on, and the high-temperature, high-pressure refrigerant is discharged from the compressor into the condenser for heat release and cooling. Then, it is throttled and depressurized through a thermal expansion valve for cooling. The low-pressure, low-temperature refrigerant enters the battery cooler and exchanges heat with the high-temperature coolant leaving the battery pack. The refrigerant absorbs heat and enters the compressor suction port, completing a refrigeration cycle. At the same time, the high-temperature coolant flowing out of the battery pack outlet passes through the water pump and flows through the chiller to obtain cooling, forming a low-temperature coolant that enters the battery pack inlet to cool the battery and complete a water circuit cycle. 

 

The refrigeration mode is suitable for working conditions with high thermal load on the battery pack.

 

Heating mode:

 

The fan and compressor are turned off, the water pump and electric heater are turned on, and the low-temperature coolant is heated by the electric heater before flowing through the chiller and entering the battery pack to heat the battery.

 

Self-Circulation mode:

 

The compressor and electric heater are turned off, the water pump and fan are turned on, and the coolant circulates between the thermal management unit and the battery pack to remove the heat from the battery pack.

 

The self-cycling mode is suitable for working conditions with low battery thermal load.

 

Products Advantages

 

1. Precise temperature control within ±1℃, low pack temperature difference, slows down cell degradation and extends battery life.

 

2. 4 intelligent working modes auto-switch: cooling, heating, standby, self-circulation for energy saving.

 

3. CAN J1939 communication, compatible with vehicle VCU, built-in fault diagnosis and remote calibration.

 

4. IP67 protection, vibration- and salt-spray resistant, suitable for mining, refrigerated trucks, cold northern and hot tropical regions.

 

5. Flexible customization: cooling capacity, high-voltage platform, mounting structure, single/dual loop optional.

 

Products picture

 

product-1500-1500
product-1500-1500
product-1500-1500
product-1500-1500
product-1500-1500
product-1500-1500
product-1500-1500
product-1500-1500

Products parameter

 

1 Model NFEHP6.0-1
2 Refrigeration capacity 7KW
3 Heating capacity 8KW
4 Rated voltage 600VDC
5 Low voltage power supply 16-32VDC
6 Overvoltage protection/recovery voltage 750/730VDC
7 Undervoltage protection/recovery 400/420VDC
8 Refrigerant carrier 50%:50% Ethylene glycol/Water solution
9
Refrigerant
R134a
10
Compressor displacement
34cc
11
Working temperature
-40℃~+50℃
12
Unit protection level
IP67
13
Outer diameter of water inlet pipe
Φ20mm
14
Outer diameter of water outlet pipe
Φ20mm
15
Total mass
<50KG
16
Communication method
CAN2.0B

 

Application Scenarios

 

BTMS application.png

 

Products Description

 

NF Company.jpg

Quality Assurance & After-Sales Service

BTMS_04.png

product-600-450

Why choose us?

 

one-stop solution

professional team

high quality

 

We are committed to providing customers with reliable thermal management solutions. Contact us now to get a customized quotation and technical solution!

 

Related Products

 

BTMS

electric 3 way valve

electric coolant heater

Hot Tags: ev battery thermal management unit btms, China, factory, suppliers, manufacturers, seller, wholesale, quotation

Send Inquiry

(0/10)

clearall