Latest Products

  • 20kw Electric PTC Heater
  • 2.5kw High Voltage Coolant Heater
  • 5KW High Voltage Coolant PTC Heater
  • Electric Bus Defroster
  • 12v Diesel Water Heater
  • 2kw Air Parking Heater

Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

Temperature Control 3-Way Valve For EV Battery Cooling And Heating Loops video

Temperature Control 3-Way Valve For EV Battery Cooling And Heating Loops

This advanced Three-Way Diverting/Mixing Valve is engineered for precision thermal management in Battery Thermal Management Systems (BTMS). It ensures optimal battery temperature by accurately controlling coolant flow between heating and cooling circuits. Featuring a compact, leak-proof design, low internal volume, and compatibility with common coolants, it enhances system efficiency and reliability. Ideal for electric vehicles and energy storage systems, this robust valve supports extended battery life, safety, and performance. It is a critical component for achieving superior thermal regulation in modern electrified applications.

Description

If you're looking for the temperature control 3-way valve for ev battery cooling and heating loops, welcome to wholesale the product from our factory. As one of the leading manufacturers and suppliers in China, we will offer you the best service and fast delivery. Now, check the quotation with our seller.

 

Temperature Control 3-Way Valve for EV Battery Cooling and Heating Loops

 

Products Description

 

3 way valve 1

 

3 way valve 4

Water valve internal leakage ≤20mL/min (water test), 30kPa pressure difference
Water valve external leakage ≤5mL/min (gas test), 340kPa (gauge pressure)
Mode switching response time <10s
Control method LIN
Standard operating voltage 24V
Operating voltage range 20V~30V
Lifespan 300,000 switch cycles

 

The valve is driven by a motor or electromagnetic coil. By changing the position of the valve core, it precisely controls the flow direction and flow distribution of fluid (coolant or refrigerant). It is the core actuator of the vehicle thermal management system to achieve multi-functional and high-efficiency operation.

 

Products Working Principle

 

 

 

3 way valve 6

 

Working Principle

 

Core Function: Flow diversion or merging. It has one inlet and two outlets (A, B ports) or two inlets and one outlet.

 

Control Methods:

Proportional Regulation Type: Typically driven by a stepper motor, it can precisely and continuously adjust the valve core angle, thereby steplessly regulating the flow ratio to port A and port B (e.g., from 100:0 to 0:100).

 

On/Off Switching Type: Typically driven by an electromagnetic coil, the valve core has only two or three fixed positions (e.g., all A, all B, or half A/half B), used for path switching.

 

Products installation

 

The installation location diagram is shown below (allowed installation angles)

installation

Connection requirements with the vehicle: 

inatallation2

★It is recommended to install rubber shock-absorbing pads at the bottom of the two M6 connection mounting holes, with a hardness of HA70~80.

 

core function

3 way valve 2

The electric three-way valve is primarily used in the coolant circuit for precise heat distribution.

 

Battery and cabin heat distribution: In winter, it dynamically distributes heat generated by the PTC or heat pump to the battery pack (for heating) and the cabin heater core (for warmth) as needed.

Heat source selection: In hybrid/range-extended vehicles, it selects whether the heat comes from engine waste heat, the PTC heater, or the heat pump.

Cooling path selection: It directs heat from the battery or electric drive system that needs cooling to the low-temperature radiator or the chiller coupled to the air conditioning system.

Simple analogy: Like an adjustable faucet diverter, it determines whether hot water flows to the bathroom or the kitchen, and how much to distribute to each.

Products Technology Trends

 

3 way valve 3

High integration: Integrated with electronic water pumps, sensors, etc., forming a "thermal management execution module."

 

Lower power consumption and faster response: Optimized drive motor and control system.

 

Intelligent predictive control: Based on navigation and cloud data, it adjusts valve status in advance, achieving a seamless experience of "comfort upon entry, battery ready."

 

Flow parameters

1

2

3

 

Company introduction

 

 

BTMS07

 

 

 

 

BTMS10

 

 

 

Hot Tags: temperature control 3-way valve for ev battery cooling and heating loops, China, factory, suppliers, manufacturers, seller, wholesale, quotation

Send Inquiry

(0/10)

clearall