How to deal with the failure of the air parking heater and how to maintain it?
1、In case of faults, please check the following points：
(1)If the heater does not start after being switched on:
– Switch the heater off and on again.
(2) If the heater still does not start, check whether:
– There is fuel in the tank?
– The fuses are OK?
– The electrical cables, connections etc. are OK?
– Anything is clogging the combustion air supply
or exhaust system?
The Operation:
Press on button for 2 Seconds when switch off, red lights on left upper corner.
Pree on button for 2 Seconds when switch on, red lights off left upper corner.
Automatic power adjustment in accordance with the customized temperature setting by the rotationary switch.
Fuel pumping starts when consecutive press 5 times on the ventilation button on condition of power on for the first time when switch off press 1 time shortly for the stop of fuel pumping.
Press for 2 Seconds for Ventilation, and press for another 2 Seconds, Ventilation off.
2、Maintenance instructions
(1)Switch the heater off once a month for about 10 minutes, even outside the heating period.
(2)Before the heating period starts, the heater should undergo a trial run.
If persistent extreme smoke develops, unusual burning noises or a clear fuel smell can be perceived
or if electric / electronic parts heat up, the heater must be switched off and put out of service by
removing the fuse.
In this case, the heater should not be started up again until it has been checked by qualified staff
who have been trained on Eberspächer heaters.
(3)Check the openings of the combustion air supply and exhaust system after longer standstill periods, clean if necessary!
