Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

Thermal Management IC

May 25, 2023

Thermal Management IC

 

The thermal management of electric vehicles usually consists of five circuits, the first is the PE cooling circuit, which can cool the power converter and the motor, and usually use a radiator to cool the cooling water and waste to the PE. The heat generated by PE can be used for heating, so heat exchangers and valves are configured in the circuit.

 

The second is the circuit that cools and heats the battery. When the temperature of the battery is high, the durability decreases, so it is necessary to cool the battery to maintain the proper temperature. It is obviously different from the external temperature, please use the air conditioner refrigerant, when the difference between the external temperature and the battery temperature is large, that is, when the external temperature is high, there is a mode of using a second-hand refrigerator and cooling through the radiator. In addition, the battery thermal management circuit has a heating function to ensure fast charging performance and prevent output degradation in winter, so a battery heating mode that operates the cooling water heater is required.

 

The third is the heating loop, in some cases using air-heated PIC heaters to heat the room, and in cases where the cooling water uses the heater to heat and heat the battery at the same time, sometimes using the HeatPump's room radiator.

high voltage PTC parking heater application

PTC parking heater application

The fourth is the refrigerant circuit. In conventional internal combustion engine vehicles, the refrigerant circuit is an air-conditioning circuit for indoor cooling, but in electric vehicles, the cooling method used for battery cooling in addition to indoor cooling is self-cooling . The heat pump circuits that drive computer cooling, mainly for heating, and the refrigerant circuits that need to be heated by waste heat recovery and proper distribution of cooling performance are also becoming more and more complex.

 

Finally, it's computational cooling, which is an integral part of configuring an autonomous vehicle, and specific details about cooling and heating capabilities are currently under review.

 

The biggest problem with thermal management circuits is that each of these circuits is not configured independently; each circuit is organically connected and becomes more complex as functions are added.

 

Send Inquiry