Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

Current Status Of Thermal Management Technology For Electric Vehicle Battery System

Aug 04, 2023

Current Status of Thermal Management Technology for Electric Vehicle Battery System

 

The heat dissipation research of power batteries can be divided into air heat dissipation, liquid cooling heat dissipation, solid phase change material heat dissipation, and heat pipe heat dissipation. The existing main heat dissipation technologies are mainly the former three.

 

Air-cooled heat dissipation system

 

The air-cooled heat dissipation system is also called the air-cooled heat dissipation system. The air-cooled heat dissipation method is the simplest. It only needs to let the air flow through the surface of the battery to take away the heat generated by the power battery to achieve the purpose of cooling the power battery pack.

According to the different ventilation measures, the air-cooled type has two ways of natural convection heat dissipation and forced ventilation heat dissipation.

Natural convection heat dissipation does not rely on additional external forced ventilation measures (such as adding fans, etc.), but only uses the airflow generated by the fluid inside the battery pack due to temperature changes to cool and dissipate heat.

The forced convection cooling cooling system is a cooling system based on the natural convection cooling system plus the corresponding forced ventilation technology.

At present, there are two main types of air-cooled heat dissipation systems for power batteries: series and parallel. However, the effect of this method is poor, and it is difficult to achieve high temperature uniformity of the battery.

 

HVH Application2
HVH Application4

 

Liquid cooling system

The liquid-cooled heat dissipation system of the power battery refers to a heat dissipation system in which the refrigerant directly or indirectly contacts the power battery, and then takes away the heat generated in the battery pack through the circulation of liquid fluid to achieve heat dissipation.

The refrigerant can be water, a mixture of water and ethylene glycol, mineral oil, R134a, etc. These refrigerants have high thermal conductivity and can achieve better heat dissipation.

The current liquid cooling technology of power batteries also has a fairly mature technology, and it has been widely used in the heat dissipation system of electric vehicles. For example, the Tesla battery pack uses a liquid cooling method of a mixture of water and ethylene glycol to dissipate heat. The BMW i3 uses R134a for heat dissipation.

Liquid-cooled systems often require more complex and rigorous structural designs to prevent leakage of liquid refrigerant and ensure the uniformity of battery cells in the battery pack, and the complex structure of the liquid-cooled system also makes the entire heat dissipation system more difficult. It is very heavy, which not only increases the weight of the whole vehicle, but also greatly increases the burden on the whole vehicle, and at the same time, due to the complexity of its structure and high sealing performance, it is relatively difficult to maintain and maintain the liquid cooling system, and the maintenance cost also increases accordingly.

Send Inquiry