Important Operating Instructions for Air Parking Heaters
1. Safety checks before the start
After a lengthy period of non-use (summer months)
check that all parts fit securely (tighten screws where necessary).
Check the fuel system visually for any leaks.
2. Heating at high altitudes
When using the heater at high altitudes, please note:
•H-Plateau Heating at altitudes up to 5500m:
– Unlimited heating possible.
•Standard Heating at altitudes over 1500 mm:
– Heating is possible for short periods at this altitude (e.g. driving over a mountain pass or taking a break in a journey).
– in the event of a lengthy stay, e.g. winter camping, it is necessary to adjust the fuel supply to the altitude, please contact a JE partner for further information.
3. Initial commissioning
The following points are to be checked by thecompany installing the heater during initial commissioning.
• After installation of the heater, the coolant circuit and the whole fuel supply system must be vented carefully. Comply with the instructions issued by the vehicle manufacturer.
• During the trial run of the heater, check all water and fuel connections for leaks and firm fitting.
• If the heater shows a fault during operation, find and eliminate the cause of the fault using a diagnosis unit.
