Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

New Energy Vehicle Electric Heater Liquid Heating Technology

Aug 14, 2023

New Energy Vehicle Electric Heater Liquid Heating Technology

 

5kw PTC
2
high voltage coolant heater 71
high voltage coolant heater

 

The liquid heating method is to heat the liquid outside or in the battery box, so that it flows around the battery to heat the battery. Usually, the functions of heating and heat dissipation of the liquid heating battery pack are done together. General-purpose VOLT, TELSA, etc. use this method for heating and cooling. Liquid heating has high requirements on the sealing and insulation of the battery box, the design of the battery module and the battery box is complex, and the reliability requirements are high. Using liquid as a heat transfer medium requires consideration of insulation, safety, sealing, and ease of maintenance of the battery pack, as well as the overall quality of the battery pack. Its main advantages include:

 

(1) The efficiency of heating or cooling is relatively high;

 

(2) The liquid has a good heat preservation effect. After the battery pack is charged or discharged for a period of time, the liquid temperature has risen to a high enough temperature. The vehicle stops for several hours during operation, and it will not affect the driving again due to the rapid drop of the battery pack temperature. , but the liquid must be heated first when heating, which will consume more energy;

 

(3) The temperature consistency of the battery pack is high, and can generally be controlled within 3°C. In the case of liquid heating or heat dissipation, the heat generated by the battery cell or the speed at which the liquid heat is transferred to the battery cell is greatly affected by the heat transfer path and heat transfer method. It is best for the liquid pipe or heat-conducting parts to be in direct contact with the battery cell, but the battery The system is usually a high-voltage system, and the insulation and withstand voltage requirements between the pipeline or heat-conducting components and the battery core are very high, and relevant standards must be met. Heat conduction generally adopts metal aluminum plate, etc., which can be insulated with heat conduction silica gel;

 

(4) Suitable for batteries of various structures and types. Liquid heating/cooling is one of the main research and application methods at present.

 

Liquid heating should avoid liquid leakage. The fewer interfaces in the battery box, the better. At the same time, the existence of leaked liquid should not cause safety problems of the battery pack; the cost is relatively high, including liquid heating/cooling devices, pipes, heat conduction Plates, etc.; high quality, relatively large impact on the specific energy of the battery system. Fluid storage tanks, heating/cooling devices, pumps, etc. are generally mounted outside the battery box.

Send Inquiry