In addition to defrosting the windshield glass and heating the interior of the car, the heater's benefits to the vehicle and the occupants can also effectively improve the cold start performance of the car and improve the bad emissions of the cold car.
Friends who drive have all experienced what it feels like when they first entered the car in the early morning of winter-freezing and biting. If it catches up with the heavy snow that has just fallen, it will be even worse if the windshield is covered with snow and ice. I ignited the engine for a few minutes and then hurried on the road. It was still far from the normal operating temperature of the engine. At this time, the engine could not enter a good working condition in time, and the exhaust gas discharged seriously exceeded the standard. These are the many problems we face when using cars in winter. However, if your car is equipped with a parking heater, the situation is different.
Vehicle heaters appeared in the 1950s. At that time, in order to improve the comfort of buses, the German company developed an independent converter heater that matched the buses. After continuous innovation and development, today's heaters have covered all vehicle models, and have become smaller and smaller in size and more advanced in technology. Today's heater also has remote control and preset functions, which can be remotely controlled at any time or set automatic warm-up in advance. There is no need to start the vehicle engine, and the heater’s computer can automatically start a special heater to heat the cabin and engine. When you open the door, a comfortable and warm warmth will immediately come oncoming. The main components of the parking heater can be divided into heater body, circulating pump, metering oil pump, intake silencer, exhaust silencer, timer and remote control.
The working principle and working process of parking heater
The heater is installed in series with the engine cooling circuit. First, the remote control or timer gives a start signal to the ECU. The metering pump pumps oil from the fuel tank and pulses the fuel onto the metal felt in front of the combustion chamber. The pen-shaped igniter is heated to about 900°C, and the splash is small. The oil droplets vaporize and ignite, and the flame transfers heat energy to the engine coolant. When the preset starting temperature is reached, the air-conditioning blower starts to operate, blowing hot air into the car. At the same time, the engine is preheated by the heated coolant.
Why should the engine warm up when it is cold starting
The cold start of the engine requires a richer mixture, so the fuel consumption is higher. At the same time, the three-way catalytic converter also needs to be heated before it can function. It also requires hotter exhaust gas to reach the temperature required for operation. Therefore, as much as 80% of hydrocarbon emissions occur within two minutes after the engine is started. Tests have proved that after 30 minutes of using the parking heater, the carbon monoxide, hydrocarbon, and nitrogen oxide emissions produced by the engine's cold start can be reduced by 67%! In addition, because the engine is preheated, the degree of wear is greatly reduced. According to data, the former is 5 times as much as the latter at 40℃ and 80℃. How big the damage is.
The parking heater also consumes fuel and electricity
The heater generates heat by consuming fuel, while also consuming part of the battery's electrical energy. The current Webasto TT series heaters can be automatically adjusted under three operating powers according to the rise and fall of water temperature. Usually start for 20 minutes once, and the fuel consumption is about 0.2 liters. This fuel consumption is more fuel-efficient than a hot car in an idling state when the engine is started. Much.





