Thermal management of new energy vehicles
New energy vehicles vs. conventional vehicle thermal management: multiple new components
Thermal management refers to the management and control of the thermal load generated by the operation of a vehicle or the heating of a vehicle in low temperature operating conditions. The new energy vehicle thermal management system generally refers to the coupling system of cockpit air conditioning and the three electric thermal management.
The thermal management of new energy vehicles is mainly divided into three parts: power battery thermal management, motor electric control thermal management and cockpit thermal management. Compared to traditional vehicles, the thermal management of new energy vehicles has two new parts: motor electric control thermal management and power battery thermal management, corresponding to the addition of motor oil cooler, electric control cooler, battery cooling plate and other components.
In the cockpit thermal management, the heat production link is changed from engine heat exchange to PTC heat production (resistance wire heat production) or heat pump system heat production. The compressor in the cooling segment is changed from engine driven to electric compressor.


Traditional vehicles are divided into two systems: powertrain and cockpit thermal management, while the thermal management system of new energy vehicles is more complex and requires a higher degree of integration. The shift from fuel-driven mechanical structure-based to electronic and electrical control-based. The industry's leading car companies such as Tesla use in the software level program to control the integration of the entire vehicle thermal management, improve driving comfort and vehicle performance release, further pushing up the technical barriers.
New energy vehicle thermal management system operating mechanism
In new energy vehicles, the electric compressor is responsible for regulating the temperature in the cockpit and the overall vehicle temperature. The coolant flowing in the pipes cools the power cell and the electric motor control system at the front of the vehicle and completes the circulation in the vehicle. The heat is transferred through the flowing fluid and the valve flow is adjusted to balance the temperature in the event of overcooling/overheating to achieve thermal circulation throughout the vehicle.








