Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

Thermal Management Of New Energy Vehicles

May 09, 2024

Thermal management of new energy vehicles

1. Composition of vehicle thermal management

The cooling system of new energy vehicles generally consists of three parts: battery cooling circulation system, motor electronic control cooling circulation system, and air conditioning heating circulation system. PHEV models also have an engine cooling circulation system. The battery circulation system is mainly for battery heating or cooling, the motor circulation system is mainly for cooling the drive motor and CIDD (drive motor controller), and the air conditioning heating system is mainly for heating or cooling the passenger compartment. The main functional components involved are electronic water pumps, three-way solenoid valves, two-way solenoid valves, PTC, heat exchangers, liquid-gas separators, radiators, expansion kettles, cooling pipes, and various fixed brackets. With the electronic water pump as the power source and the coolant as the medium, the solenoid valve controls the flow direction, so that the cooling medium flows along the pipeline through the radiator and the cooled body, and heat is exchanged to dissipate heat and cool down, so that the working temperature of the functional parts is always kept within an ideal working range, maximizing its performance. Whether it is a pure electric vehicle or a hybrid vehicle, the battery thermal management circulation loop is independent of other systems. The main reason is that the normal working temperature range of the battery pack is quite different from that of other systems. The operating temperature of the battery pack is generally not allowed to exceed 35°C, while the drive motor often operates at around 55°C and the engine operating temperature range is around 95°C, so each circuit must operate independently.

 

2. Differences from traditional automobile thermal management

The thermal management of traditional automobiles is simple, without complex control and component systems. Its goal is only to ensure that the engine temperature always works in an ideal range, and to provide the required heat for the passenger compartment by using the waste heat generated by the engine, without consuming any additional power. There are great differences in the system structure between new energy vehicles and traditional vehicles. The requirements for the arrangement and installation of system components on the whole vehicle are also increased, and the space demand for the cabin is greater. Different types of new energy vehicles have different characteristics. For pure electric vehicles, there is no engine as a power source for the circulation of coolant, and there is no waste heat from the engine to be used. For hybrid vehicles, due to their special control strategy, the engine cannot provide power for the circulation of coolant when it is not working, nor can it provide the required heat source for the passenger compartment in real time. Therefore, in terms of structure, the thermal management system of new energy vehicles is designed with an independent electronic water pump to provide power for the circulation of the coolant, and the warm air is usually heated by electricity. After the independent electric heating PTC is designed to heat the coolant, the coolant is circulated to the warm water tank in the car to provide heat to the passenger compartment. This is the current mainstream method; there is also a method of directly heating the air passing through the evaporator box and blowing the heat into the car through a fan. This method is rarely used at present because it involves the safety of the car.

Send Inquiry