Timer Controller Operating Instructions
1. Introduction
1.1 Please read through first
Please read these operating instructions carefully before starting to set up and operate. This operating manual contains all the important information you need during setup and operation. Please keep this operation manual in a safe place for future reference.
1.2 Safety instructions
When entering the gas station, be sure to turn off the heater. Pay attention to all information and tips, especially the safety instructions in this document and heater instructions!
1.3 Range of use
The timer is used to turn on and off the heater equipment installed in the car, as well as to select the operating mode, set the operating time and pre-select the starting time.
1.4 General tips
The operation structure of the timer is simple. All functions can be set with 4 keys and can be changed when needed. If the car is powered off (the battery is disconnected) and then the power supply is restored, the time and day of the week must be reset.
2.Technical parameters
| Rated voltage | 12V / 24V |
| Operating voltage range | 9-32V |
| Size | W: 82mm, H: 37mm, D: 12mm |
| Operating environment temperature | -40℃ to +65℃ |
| Installation location | Inside the vehicle |
| Timing | 3 start times can be preset within 7 days |
