Water Parking Heater Installation2
Vehicle Installation Requirements
1.Exhaust system
The exhaust vents must be positioned and installed in such a way as to prevent exhaust gas from entering the cabin through the ventilation device, heater vents or open windows.
2.Combustion air intake
The air in the heater combustion chamber is not allowed to be drawn from the passenger compartment of the vehicle.
The air inlet must be positioned and installed in such a way that it will not be blocked by other objects.
3.Hot air inlet
The hot air supplied must consist of fresh air or circulating air, and be drawn from a clean area, and the area cannot be contaminated by exhaust gas from the engine, combustion heater or other sources in the car.
A grille or other suitable tools must be used to protect the air inlet pipe port.
4.Hot air exhaust outlet
The hot air pipe in the car must be positioned and installed in such a way that it will not cause the danger of personal injury or equipment damage when touched.
The exhaust port must be positioned and installed in this way or take protective measures: it will not be blocked by other objects.
