Latest Products

  • 20kw Electric PTC Heater
  • 2.5kw High Voltage Coolant Heater
  • 5KW High Voltage Coolant PTC Heater
  • Electric Bus Defroster
  • 12v Diesel Water Heater
  • 2kw Air Parking Heater

Contact Us

    Hebei Nanfeng Automobile Equipment (Group) Co.,Ltd

    Phone: +86 18811334770

    Tel: +86 0317 8620396

    Tel: +86 010 58673556

    Candy Jiao

    E-mail: nh.jiao@auto-parkingheater.com

    Email: nh.li@auto-parkingheater.com

    Add: Room 505, Building B, Free Town Center, No.58, East Third Ring South Road, Chaoyang District, Beijing, 100022, P.R.China

Electric Vehicle Air Conditioning Compressor video

Electric Vehicle Air Conditioning Compressor

As the core component of vehicle HVAC system, our scroll compressor provides stable refrigeration for passenger and new‑energy vehicles. It adopts advanced scroll positive‑displacement design, featuring high efficiency, low noise, high durability. It drives the vapor‑compression refrigeration cycle, realizes heat transfer between cabin and outside environment.

Description

If you're looking for the electric vehicle air conditioning compressor, welcome to wholesale the product from our factory. As one of the leading manufacturers and suppliers in China, we will offer you the best service and fast delivery. Now, check the quotation with our seller.

 

Electric Vehicle Air Conditioning Compressor

 

The electric vehicle air conditioning compressor is the core power unit of EV HVAC thermal management system. As a scroll‑type positive‑displacement compressor driven by high‑voltage motor, it is the heart of the vapor‑compression refrigeration cycle. It establishes high‑low pressure differential inside the refrigerant loop, realizes heat transfer between vehicle cabin and external environment.

 

Our electric scroll compressor is specially designed for battery‑electric vehicles. It supports variable‑speed control, works with heat‑pump air‑conditioning systems, delivers stable cooling and heating performance under idle, low‑speed and high‑load working conditions. It is widely used for BEV passenger cars, electric buses and light‑duty commercial vehicles, meeting both OEM original equipment and aftermarket replacement demands.

electric air compressor14

electric air compressor12

 
 

Electric Vehicle Air Conditioning Compressor working principle

 

 

1. Suction: Low-temperature, low-pressure gaseous refrigerant enters the crescent-shaped cavities formed between the orbiting and stationary scroll plates through the suction port on the side of the compressor.
2. Compression: The motor drives an eccentric shaft, causing the orbiting scroll to move in an orbital motion around the center of the stationary scroll. As the crescent-shaped cavities move toward the center, they progressively shrink in size; the gas is compressed, causing both its pressure and temperature to rise.
3. Discharge: Upon reaching the center, the high-temperature, high-pressure gaseous refrigerant is discharged through the central outlet of the stationary scroll and sent to the condenser.
4.Compressor Function: To pressurize and raise the temperature of the refrigerant, enabling it to dissipate heat.

 

 

Products application

 

 

Electronic-water-pump_09.png

Our electric scroll air‑conditioning compressors are applied to BEV & PHEV passenger vehicles, electric buses, light‑duty electric commercial vehicles and special electric engineering vehicles.

 

They support both OEM original equipment. Compatible with heat‑pump HVAC systems, they provide reliable cabin cooling and heating, and also participate in whole‑vehicle thermal management for batteries, motors and electronic control units.

 

 

why choose us

 

 

 

High-insulation motor

 
 

Low-noise motor design

 
 

High-reliability scroll set (fixed and orbiting scrolls)

 
 

Low-noise software design

 
 

High-efficiency oil return design

 
 

High-reliability heat dissipation for power components

 
 

Rapid overcurrent protection

 
 

Low-noise spindle eccentric structure with liquid-slugging resistance

 

Electric Vehicle Air Conditioning Compressor specification

 

(1)Compressor Specifications

 

Model NFEZC45
Type Electric scroll

Refrigerant

R290

Work temperature

-20℃~110℃

Storage temperature

-40℃~110℃

Voltage resistance

leakage current<10mA@2000V(AC)/50HZ

Electrical isolation

≥20MQ@1000V(DC)

Displacement

45CC/r

Speed range

800-8500rpm(Customizable)

Cooling method

sucion gas cooling

Refrigerant leakage rate

≤5g/year

Lubricating oil

PVE

Shell

Cast Aluminum Alloy Shot Peening

Total weight (including oil)

≤7.7kg(including oil)

Install position

near motor or gear case

Suction inner size

Φ28.4mm(Customizable)

Discharge inner size

Φ15.35mm(Customizable)

IP rating

IP67

Material restrictions

ROHS compliance, lead free

Mechanical pressure release

4+0.4Mpa(A)

Suction operating pressure

0.1~0.5Mpa(A)

Discharge operating pressure

0.7~2.8Mpa(A)

Maximum operating pressure

2.8Mpa(A)
Corrosion resistance 500HRs later:functional and less than 5%surface area visual damage

Cleanliness

Impurity weight 10mg,size 0.5mm max ,seal inlets and outlets use dust caps for shipping

 

(2)Structural composition

 

product-721-290

It is an integrated unit consisting of a compressor housing, a scroll compressor mechanism, a motor, and a controller (Inverter), and can operate independently of the engine.

 

(3)Noise Specifications Test condition:

 

Discharge P. Suction P. Sub Cooled Super heat Ambient temperature
1.5Mpa(A) 0.3Mpa(A) 5℃ 10℃ ES

 

Performance and Nosie curve:

 

product-943-394

 

certificates

 

BTMS_08.png

Our products comply with international automotive standards, with following certificates available:

- ISO 45001 Quality Management System
- ISO 14001 Quality Management System
- IATF 16949 Automotive Quality Management System
- CE Certification
- Product performance test report (available upon request)


Note: Custom certificate application can be discussed for special market requirements.

 

Why Choose Our Compressor

 
238

We provide complete Automotive AC Electric Compressor solutions. Strict production control and performance testing ensure product consistency. Customization is available for different vehicle platforms, voltage, displacement and refrigerant requirements. We support OEM, ODM and aftermarket supply. 

 

Company Profile

 
product-750-515

NF group is a professional manufacturer focusing on automotive thermal management components, specializing in R&D, production and sales of EV air conditioning compressors, HVAC system parts and heat&cooling management solutions.

We own complete production lines, precision processing equipment and professional testing laboratories. Strict quality control is implemented from raw material incoming inspection, production processing to finished‑product performance testing.

We provide OEM & ODM services for global customers. Our products are exported to Europe, North America, Southeast Asia, Middle East and other regions. We are committed to offering reliable, cost‑effective thermal management components for new‑energy vehicle industry.

 

Shipping & Delivery

 

Delivery Time

 

  • Sample order: 10-20 working days.
  • Mass production order: 20‑35 working days, subject to order quantity and customization requirements.
shipping picture03.jpg

Transportation Options

Sea Freight (FCL / LCL) Most commonly used for bulk orders. Port of loading: Tianjin / Qingdao / Shanghai. Suitable for large‑quantity orders, cost‑effective.

Air Freight Fast delivery for urgent orders. Suitable for small‑batch samples or emergency replacement parts.

Express Courier (DHL / FedEx / UPS / TNT) For small‑size sample shipments, door‑to‑door service.

Railway Transportation Available for Europe and Central Asia markets, balance of cost and transit time.

Packaging

 

Standard export carton packaging with foam protection. Customized packaging with customer's logo is acceptable for bulk orders.

 

 

fAQ

 

Q1: What refrigerant can this compressor use?
A1: Standard compatible refrigerants are R‑134a and R‑1234yf and R290. Special refrigerant can be customized on demand.

 

Q2: Do you accept OEM / ODM orders?
A2: Yes. We support OEM and ODM service, including custom voltage, displacement, mounting bracket and logo printing.

 

Q3: What is your quality guarantee period?
A3: We provide 36‑month warranty for finished products under normal operating conditions. Please refer to our warranty terms for detailed clauses.

 

Q4: What is your minimum order quantity?
A4: MOQ for standard items is 1 pcs. For customized OEM items, MOQ will be discussed according to your requirements.

 

Q5: How is the goods packed for export?
A5: Standard export carton with anti‑shock foam inner packing. Custom logo packaging is available for bulk orders.

Hot Tags: electric vehicle air conditioning compressor, China, factory, suppliers, manufacturers, seller, wholesale, quotation

Send Inquiry

(0/10)

clearall